Clamping systems

Sistemas de sujeción

A high-performance construction solution suitable for all types of construction. Internationally approved, we can propose the best solution for your project.


Soporte Técnico

Planos de montaje de perfilería. Detalles constructivos técnicos por los mejores profesionales.


Diferentes sistemas de anclaje a medida para la instalación.


Acabados perfectamente cuidados en marmol, granito, pizarra, cualquier otras piedra natural


Contamos con más de 20 años de experiencia y los mejores profesionales.


Mantenimiento y revisiones periódicas de la instalación en cumplimiento con la normativa.


Colaboraciones con diferentes partners y socios para una instalación íntegra y cuidada.

Sistemas de sujeción

The PHI vertical profile system is economic and easy to install. It has been scrupulously designed to resist all types of mechanical stresses and corrosion problems that can arise in construction work.

As it is a profile system, it can be installed on solid, perforated or hollow supporting walls. The PHI system can be adjusted vertically and horizontally.

The system can be loaded immediately, and can be assembled regardless of the weather conditions. Also, thanks to reducing the number of fixing points on the support, more continuous thermal insulation is achieved by eliminating a large number of thermal bridges.

The PSI system is a very simple, economic and easy-to-install vertical profile system.

The PSI system can be adjusted vertically and horizontally. The system is fabricated with the same materials than the PHI.

For this reason we are talking about a system with all the guarantees, excellent raw materials and more economical where, due to the required mechanical performance, It is not necessary to support a large resistance loads.

This is a subsystem that can be used in conjunction with the PHI, PSI or other special systems.

The horizontal Lest profile is made of EN AW 6063 T5 aluminium alloy, and is very light and strong thanks to its tubular cross-section. It has a flat ribbed flap used to attach it to the vertical profile, using a self-drilling screw and locking washer, and has a specially designed groove to use the Link fastenings with a clip system, making it very easy to install.

The horizontal profile is ideal for attaching stone sections of any shape, both for continuous and staggered joints. This system with horizontal profile can be used with con visible clip fasteners, hidden clip fasteners or pivot fasteners (21 or 32 mm.).

The Lined DSETA 2 system is an adjustable anchor for stone. The vertical profiles are a metal substructure to receive the solidarity union of fastenings that engage the stone cladding.

The profiles are connected to the floor slabs of the building to which they transmit the stresses affecting the panelling by using slab anchors.

DSETA 2 is the fixing system for stone claddings. It concerns five different kind of fastenings that works with the Aplomado’s DSETA 2 vertical profile.

The main feature of these systems is their ability to slide horizontally along the profile, which helps to connect paneling that is displaced in relation to the profile (such as panels above and below windows).

It is a mounting system for stone facings. DSETA system is based on individual and specific anchors which are placed as a security of stone facings.

DSETA system consists of 7 types of security clip fastenings for new works. They are made of stainless steel A-2 (AISI-304)offering you appropriate values of mechanical strength and atmospheric corrosion.

These Staples, seamless, they will be fixed to a particular support or the building itself and on the other hand stone plate.

We also offer for the cladding reparations, two security fastenings, DSETA Direct and DSETA Direct, which are used in those cases where there is a risk of cladding detachment.

The Direct system is based on point-supported individual anchors that do not require vertical profiles for their alignment.

This system is relatively economic and frequently used for covering concrete walls made of prefabricated elements or built on site. It can be used on walls made of solid or semi-hollow bricks. It is not recommended for hollow cement blocks with side walls less than 40 mm thick. Standard UNE 41957.

The Direct system is made of A-2 stainless steel (AISI-304). This type of steel has the ideal resistance to mechanical stress and atmospheric corrosion.

Consists of a threaded weldless bolt attached to the supporting wall or building on one side, with its other flat side equipped with a device which supports and retain the cladding. This device could be hidden fastenings, with pivot and visible fastenings, for which we have two options, Direct Strow with retention spring, for claddings with irregular thickness and Direct Basic, a new system for claddings with regular thickness, but cheaper and simpler than Direct Strow.

The Standard system is based on individual anchors with vertical and depth adjustment. The system consists of a weldless frame, one side of which is attached to a supporting structure or directly onto the building, while the other side is equipped with a fastening in the same material.

We made three different models, the first one is standard normal, the second (Standard Freno) with a security lock washer serving as a possible slippage of the anchor and fixing brake, and the third, It includes also the brake but in addition is built with greater thickness and a rear nut giving it much more resistance.

This system is frequently used for covering concrete walls made of prefabricated elements or built on site, or in solid and semi-solid brick walls. It is not recommended for walls made of hollow or semi-hollow brick, or hollow cement blocks with side walls less than 40 mm thick.


Para información técnica detallada de todos nuestros productos descarga nuestro catálogo.